Exhibition Brandframe

The various aluminium profiles are extremely tough and durable and extremely hard to damage! The replaceable silicon edge full colour fabric graphics are made of a hard-wearing and machine washable polyester fabric!

Once you invest in the Brandframe system you can be assured it will be your “go to” banner display system for years to come.

Depending on your requirements as to storage and portability, the size of the component pieces can be supplied in smaller sections to suit your requirements.

Naturally this means the smaller each piece is, the more there will be and the longer it will take to assemble the stand.

Custom road cases and carry cases can be supplied upon request.

Assembly is straightforward using Brandframe! The aluminium extrusion lengths lock together using a simple key lock tool supplied with the system. Depending on the size of the display it should take one person no more than 10 minutes to assemble the frame and then feed the Silicon Edge graphics into the external groove.  For larger stands it is generally much easier if two people assemble the system.

We can also retrofit Brandframe extrusion to existing framing structures so you can quickly and economically experience the advantages of the fabric tension system.

The Brandframe display system uses Silicone Edge Graphic (SEG) technology to make your graphics so, so easy to set-up and replace. SEG graphics have a silicone edge around their outer; this silicon inserts into a groove within the aluminium framing making the graphics easy to change or replace when a design update is required. No tools are required!

For retailers this can be critical, as a simple graphics changeover solution for store staff saves the ongoing cost of installers or site visits from graphics provoders. 

The graphic skins are printed using the dye-sublimation printing process, meaning the environmentally friendly water-based inks are heat infused into a purpose-made fabric. This ensures vibrant print results with a colour-fast and washable graphic!

Check here for a selection of exhibition stand ideas.

1. Our standard Brandrame can be made in sizes and shapes to suit you, with vibrant, easy-to-change graphics.

2. The Brandframe Glow is an illuminated style that uses LED lighting inside the frame to shine out through your graphics to create a giant "lightbox" effect.

3. Upgrade to programmable LED lights inside your wall, allowing you to tell a story in seconds or highlight key components of your brand and any special offers. Update your programming with every new graphic installed for a fresh message.

Brandframe Exhibition Wall 6000mm

o Size: 6000mm wide x 2350mm high
o Brandframe Aluminium Frame
o 1-Piece (no seams) full-colour dye sublimated fabric skin
o 2 x Feet

Brandframe Exhibition Wall 3000mm

o Size: 3000mm wide x 2350mm high
o Brandframe Aluminium Frame
o 1-Piece (no seams) full-colour dye sublimated fabric skin
o 2 x Feet

Brandframe Exhibition Wall 2400mm

o Size: 2400mm wide x 2350mm high
o Brandframe Aluminium Frame
o 1-Piece (no seams) full-colour dye sublimated fabric skin
o 2 x Feet

Artwork can be supplied directly by you or your graphic designer, or if you prefer we have an in-house graphic design department to prepare your print-ready artwork.

If you'd like pricing for graphic design simply send us a brief of requirements and we'll be happy to estimate for you. When you're at the checkout page simply advise us which option you prefer.  

As the Brandframe is custom built to your specifications there is not a standard sizing template, so we will advise you of the artwork sizing once the specifications of your stand are agreed.

For general instructions regarding file formats, artwork set-up, bleeds, and options for sending us artwork please be sure to review our artwork file specifications before preparing your print files. 

Listed below is a range of sizing templates for the most popular Brandframe sizes.

Sizing template for Brandframe 1m wide x 2m high

Sizing template for Brandframe 2m wide x 2.35m high

Sizing template for Brandframe 2.95m wide x 2.35m high

Sizing template for Brandframe 3m wide x 2.4m high

Sizing template for Brandframe 5.95m wide x 2.35m high

Sizing template for Brandframe 5.95m wide x 2.4m high

Sizing template for Brandframe 6m wide x 2.4m high

Standard production lead time for Exhibition Brandframe is 2 weeks. This time is calculated from when you place your order and print-ready artwork has been prepared.

We take pride in having one of the quickest turn arounds in the display and exhibition industry. Miracles are our specialty, so if you need something sooner than the timeframes below just ask!

(The above times are calculated from the timing of your order confirmation, and in some cases the supply of your print-ready artwork if that is required to commence your job)

Allow extra time for delivery if delivery is required. We can advise you on freight timings, which will vary according to the delivery post code.

Freight pricing will be automatically calculated once all items are in your cart. Freight is calculated based on the size and weight of your combined order, as well as delivery address.

With robust materials and construction, this durable design is suitable for multiple use over a long period and carries a 5 year warranty!

The warranty applies to non-graphic components and is available to the original owner of the unit. The warranty does not cover mistreatment or normal wear and tear.